Get Used Equipment at Great Prices

We look after our rental equipment very well. It is regularly services and maintained for long life and optimum performance. Occasionally, these items are offered for sale. In addition, much of our used equipment comes from customer trade-ins. Each machine gets checked over thoroughly by our mechanics so it is ready for its next potential owner. Dunrite also offers an in-house limited warranty on our used equipment which is notes on every used equipment ad.


We encourage you to check this page frequently, as our used equipment comes and goes very fast. For any current “0” availability, we do have a waiting list so please let us know if there is something you are looking for and we will be sure to add you to our list. Don’t “snooze and lose”; get your name on our waiting list and give us a call today.

Walk Behind Trowels

Items Available: 1

USED BARTELL B436 OLD STYLE POWER TROWEL

This machine has a GX160 Honda motor with a quick release set up; it comes with new float & finish blades. It has been serviced, inspected and in good running condition. Dunrite will offer a 30 day limited warranty.


$1,725.00 + GST

SURFACE PREP EQUIPMENT

Items Available: 9

USED HUSQVARNA PG 280 GRINDER

This 125V 20A machine has only 24 hours on it; it has been tested and is in great condition. It has an 11” grinding disc that takes up to twelve diamonds and comes with one used set of 20-30 grit soft bond diamonds with lots of life still. Please ask a sales representative about package options with this machine. Dunrite will offer a 30 day limited warranty.


$2,500.00 + GST

USED DUNRITE CONCRETE VIBRATOR

This vibrator has been tested and is in good condition. It has a 1.2 motor, 4ft core and casing and 1” head. Dunrite will offer a 30 day limited warranty.


If you require something different (i.e. whip length and head size) please talk to a sales rep for options.


$500.00 + GST

USED DUNRITE CONCRETE VIBRATOR

This vibrator has been tested and is in good condition. It has a 2.4 motor, 18ft core and casing and 2” head. Dunrite will offer a 30 day limited warranty.


If you require something different (i.e. whip length and head size) please talk to a sales rep for options.


$750.00 + GST

USED LAVINA 21-X GRINDER/POLISHER

This 110V single phase 16 amp grinder is off our rental fleet. It is variable speed, 21” work path with three 7” heads, It only has 155 hours and weighs 219 lbs. The dedicated breaker equirement is 20 amps, does not work well with a generator. It comes with 3 Velcro resin pad holders and two 18.5 lb weights. Diamond tooling is sold separately, please ask a sales representative for pricing. Dunrite will offer a 30 day limited warranty.


$3,500.00 + GST

USED EDCO CPM8 ELECTRIC SCARIFIER

This single phase 220V machine has been tested; it is in good condition. It has a 5HP motor and new carbide teeth. Please ask a sales representative about package options with this machine. We service everything we sell and stock parts/consumables. Dunrite will offer a 30 day limited

warranty.


$2,600.00 + GST

USED TERRCO 3100-3P VARIABLE GRINDER

This three phase 230V 25hp machine is a trade-in; in great condition. It comes with 4 weights, a 20 gallon water tank, used 90’ extension cord and new dust shroud brushes. Inquire within for pricing on diamond tooling not included with machine purchase. Dunrite will offer a 30 day limited warranty.


$21,000.00 + GST

USED BLASTRAC GPX 10-18 RIDE ON SHOT BLASTER

The GPX 10-18 is a mid-range system ideal for applications such as warehouses, parkades,

roads and highways.


This machine got a complete engine rebuild with brand new bottom end (block, pistons, crank, oil pump, oil cooler, etc.), and starter. New speed sensor and display. Hour meter was replaced so hours are at zero. All wear parts; liners, blast blades, skirts, etc. have been inspected and are in good condition. Skirts are in OK condition.


It has been tested on gasoline and runs perfectly. The propane system has ONLY been tested to ensure

the components all operate, and the engine has been run on propane; but PRIOR to operating this unit

on propane, you will have to have the propane system inspected, tested, and set up by a qualified propane engine mechanic. Failure to comply with this may lead to engine damage. Dunrite will offer a limited 30 day warranty.


$19,000.00 + GST

USED EAGLE PROPANE EDGER

This machine was a trade-in which has been inspected by our technician; it is in good condition. It has 90 hours, a 17HP Kawasaki propane engine, 13” head and comes with 4 sets of diamonds (100g med, 200g med and 2 x 50g med). It does not include water hose or weights. This Edger features an adjustable three way head that swings to the right or left side as well as straight forward as shown. Dunrite will offer a 30 day limited warranty.


$5,000.00 + GST

USED STONEKOR EAGLE G&P ONE GRINDER/POLISHER

This machine was a trade-in which has been inspected by our technician; it is in good condition. The coupler and belts have been checked. It has 160 hours, a 22HP Robin propane engine, 30” grinding diameter with three 13” rotating heads, weighs 1,385 lbs. It comes with 1 new set of 60 grit medium bond diamonds (mounted on back plates), 1 used set of 100 grit medium bond diamonds (40% life left), one extra set of back plates without diamonds, 27 used resin back plates and a transport stand for moving around on site. We recommend the propane system get serviced by a certified technician before putting into operation. Dunrite will offer a 30 day limited warranty.


$9,000.00 + GST

General Equipment

Items Available: 3

USED BE PRESSURE WASHER 4000 PSI

This pressure washer has 4000 PSI max pressure with a 4.0 GPM max flow. Powered by a 13 HP gas engine with steel tank. This machine has been fully inspected; it comes with one of each nozzle Red (0°), Yellow (15°), White (40°), Black (soaper), a 50’ hose and 36” wand complete with gun. Dunrite will offer a 30 day limited warranty.


$1,000.00 + GST

USED KV 750 HUSQVARNA CUTTING CART

This cart is designed for a K750 saw but has been tested with a K760 14” power cutter. It has an easy adjustable handle with throttle control, comes with a 4 gallon water tank, and the saw can be installed and removed quickly. It folds for easy storage and transportation. Please ask a sales rep for details on purchasing a K760 saw in stock at Dunrite.


$300.00 + GST

USED CX-3 MK COMPACT WALK BEHIND 14” SAW

This machine was a trade-in; it has been inspected by our technician. It weighs 119lbs, comes with a Honda engine, cuts within 1” of wall or curb and can be used for wet or dry cutting. It does “Not” include a blade, we do stock concrete and combo blades; please inquire about pricing and availability with a sales representative. Dunrite will offer a 30 day limited warranty on this unit.

$9000.00 + GST


Equipment Need Repairs?

We offer the services and repairs you need to keep your tools in working order.

Bring It Down

In a Pinch?

If you need to rent equipment while yours is in the shop, talk to us for a deal!

Call Us Now
Created by

Legal notice